How to Save the Web page as PDF without any Software in Chrome Browser

All of them know the chrome browser. Using this you can save the any web page as PDF to your computer. If you see any use full content on any web page and you want to save the content in pdf and for future reference. You want to save the web page as pdf you need the software or any other tool to save the web page as the pdf. But in the Google Chrome Browser you no need to use any tool to save the web page in pdf. Chrome gives the option to save the page in pdf. 

How to Save the Web Page in PDF in the Google Chrome.     

• First open the which page you want to save as in pdf format.

•     After reaching the webpage press the ctrl+p after press the ctrl+p it will open the page for print option to print the page. 

•   Now you see the Destination option present in the first option present on the left side of the window.    

•   Click the change button after click the change button new popup window will open in that you will see the Local Destination part present at the second one in the popup window.

• In that local Destination part you will see the Save as PDF as the first option and click to select the option.

• Now its return back to the main page in that you will see the save button you can click the save button to save the page as a pdf.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Common hardware failure symptoms and solutions

> Computer freezes randomly, mouse will not move...
Hard drive fails itself, the drive is either having a defective needle or sector it will be stuck on... this drive needs to be replaced before it stucks completely, it is recommended to do a back up as soon as possible and then check the drive with a testing program to look for bad sectors

> Computer keeps booting with system check up...
Disk has many bad sectors, needle is either defective and making scratches on the drive, or is not in a decent quality anymore, windows will replace your faulty sectors and try to repair... however, it is best to back up and plan for a newer hard drive. as this drive may fail completely and you may have lost your data, this can also be tested with a testing program.

> Bluescreens "fault in non paged area"
Usually these bluescreens appoint one or more bad memory modules, you can check this with a memtester and see if you get errors... if you do get errors and have more then one slots occupied, test one by one and see if it works by then

> Boot, but no screen
This also can be a common memory issue... as when the PC boots, the first possible data gets sent from bios to memory to provide image to your monitor, in this case you will have to replace this memory with Modules that you are sure that are working... as this usually means all modules are dead.

> Blurry screen/floating pixels
Graphics card... your graphics card may be getting too hot and may need more cooling, also check the capacitors of the card, these may be damaged, if this is an active cooling... try to see if it is dusty, if it is, blow it out, if this is passive cooling, please consult your technician.

> Green dots on screen in movies/Black area
Usual graphics card failure oncoming. check the capacitors of the card, also try and see if your connector is plugged in correctly if you have not used the screws on the connector

> PC boots but long beep and two short
This is usually the sign of a dead graphics card... if this computer has an onboard graphics card, your mainboard may be dead as well, although, you can try with an add-on video card, if you are already using a addon card, you may be able to use your onboard graphics card that is attached to the mainboard. 

> Random shutdown when playing games/ working at computer... restarts after shut down all most instantly
Overheating problem. check your cooling, replace cooling paste or check your overclock settings if you have overclocked your CPU

> PC does not boot at all.
Try a new powersupply, this may be the defective product.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Here are the cool 14 Notepad Tricks

Here are the 14 Notepad Tricks for you:


1) Notepad trick to use it as a Diary
Open notepad
Type .LOG
Save the file as LOG.txt
Write anything in it and it will be saved with the time when you edit it.

2) Notepad trick to Test Antivirus
Open Notepad.
Copy the code give below in the notepad file:
X5O!P%@AP[4PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
Save it with an .exe extension like testvirus.exe

3) Matrix Notepad Trick
@echo off
color 2
:start
echo %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random% %random%
goto start
Save this file as Matrix.bat
Make sure the file type is kept as ALL FILES while saving it as a .bat file.
Don't forget to Download Revo Uninstaller free.

4) Notepad Trick to Open DVD Drive
Open Notepad.
Copy the code given below onto the notepad file:
Set oWMP = CreateObject(“WMPlayer.OCX.7?)
Set colCDROMs = oWMP.cdromCollection
do
if colCDROMs.Count >= 1 then
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
For i = 0 to colCDROMs.Count – 1
colCDROMs.Item(i).Eject
Next
End If
wscript.sleep 5000
loop
Save it as “Anything.VBS”.
You should also check out Windows 7 Keyboard Shortcuts which has all the keyboard tricks that you can think of.

5) Notepad Trick to annoy your friends
Open Notepad.
Paste the following code in the notepad file:
@ECHO off
:Begin
msg * Hey
msg * Want to have Fun?
msg * You do?
msg * We will both have fun, alright?
msg * More fun?
GOTO BEGIN
Save the file with any file name but with .bat as extension and close it. For eg. cool.bat

6) Notepad Trick to shutdown computer forcefully
Open Notepad.
Paste the following code in it:
@echo off
msg * Shutdown computer.
shutdown -c “Sleep Tight” -s

7) Notepad Trick to Lock Folders
Lets lock a folder using notepad trick which is named as PICS in your D: drive , whose path is DICS
Then the code should be something like this:
ren pics pics.{21EC2020-3AEA-1069-A2DD-08002B30309D}
Pics is your folder name. Use the name of the folder in place for pics. Save the text file as lock.bat in the same drive.
To unlock this locked folder:
Open another new notepad text file and type the following:
ren pics.{21EC2020-3AEA-1069-A2DD-08002B30309D} pics
Save the text file as key.bat in the same drive. Here again, pics is the name of the folder. Change it to the folder name you want to lock it.
Have you tried Internet Explorer 9 yet? It's free:
Download Internet Explorer 9

8 ) Notepad Trick to type slowly
Open Notepad.
Paste the following code in the notepad file:
WScript.Sleep 180000
WScript.Sleep 10000
Set WshShell = WScript.CreateObject(“WScript.Shell”)
WshShell.Run “notepad”
WScript.Sleep 100
WshShell.AppActivate “Notepad”
WScript.Sleep 500
WshShell.SendKeys “Hel”
WScript.Sleep 500
WshShell.SendKeys “lo ”
WScript.Sleep 500
WshShell.SendKeys “, ho”
WScript.Sleep 500
WshShell.SendKeys “w a”
WScript.Sleep 500
WshShell.SendKeys “re ”
WScript.Sleep 500
WshShell.SendKeys “you”
WScript.Sleep 500
WshShell.SendKeys “? ”
WScript.Sleep 500
WshShell.SendKeys “I a”
WScript.Sleep 500
WshShell.SendKeys “m g”
WScript.Sleep 500
WshShell.SendKeys “ood”
WScript.Sleep 500
WshShell.SendKeys ” th”
WScript.Sleep 500
WshShell.SendKeys “ank”
WScript.Sleep 500
WshShell.SendKeys “s! “
Save the file with any name and with .vbs extension and close it.
Now open the file and see how freakishly slow the messages appear!
NOTE: In order to stop it. Follow the “Note” given in 10th Trick.

9) Infinite Notepad Trick
Open Notepad.
Paste the following code in your notepad file:
@ECHO off
:top
START %SystemRoot%system32notepad.exe
GOTO top
Save the file with any name nut with .bat extension and close it.


10) Notepad Trick - Text to Audio
Open Notepad file on your Windows PC.
Copy and paste the below mentioned code :

Dim msg, sapi
msg=InputBox("Enter your text for conversion–www.techvorm.com","TechVorm Text-To-Audio Converter")
Set sapi=CreateObject("sapi.spvoice")
sapi.Speak msg
Save this file with any name with .vbs as extension. For eg. Text-To-Audio.vbs


11) Notepad Trick - BUSH HID THE FACTS
Open notepad.
Type BUSH HID THE FACTS
Save that file.
Close it
Open It Again See…

12) Notepad Trick Print Tree Root
Open NOTEPAD and enter {print tree root}
After that hit enter and type C:windowssystem
After that hit enter and type {print C:windowssystemwinlog
Hit enter and type 4*43″$@[455]3hr4~
Then save the file as teekids in C:windowssystem.

13) World Trade Center Notepad Trick
Open your Notepad
Type the flight number Q33N
Increase the Font Size to 72
Change the Font to Wingdings

14) Notepad Trick to Format Hard disk
Open Notepad and type:
a) Code : 01001011000111110010010101010101010000011111100000
b) Save As it as anything.EXE
c) Run it. Beware that the entire HDD will be erased
I hope you enjoyed these awesome and cool Notepad tricks, if you liked it then share it with your friends.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Extract Video, Audio, Subtitles and More from MKV files with MKVcleaver

MKVcleaver is a GUI (Graphical User Interface) frontend to the command line tool MkvToolNix designed to extract data from MKV files. Matroska or MKV is a multimedia container format that can hold an unlimited number of video, audio, picture or subtitle tracks inside a single file, complete with menu systems similar to that of DVDs. MKVcleaver allows you to extract these tracks - video, audio, subtitles, chapters etc. that contain in an MKV file.

To use MKVcleaver you will also require MkvToolNix, because as already mentioned, MKVcleaver gives only the GUI; the actual operation is done by MkvToolNix. Download and install MkvToolNix. You can also download the 7zip archive instead of the installer and extract the contents to a folder.

 


Now start MKVcleaver and locate the folder where you extracted the MkvToolNix program by clicking on the ?Locate MkvToolNix? button.


To add MKV files, simply drag and drop them into the program window or load them using the usual file loading process. After the file or files are added, click on the ?+? adjacent to the added files and select the tracks you want to extract. MKVcleaver can process multiple files at once. To help select files in batch processing, there is a small window on the right that shows the various types of tracks that the program can extract. Choosing a track type will automatically select all tracks of the chosen typefrom all added MKV files.


MKVcleaver also has several additional features like:

• File naming options for easy sorting
• Extract raw FLAC stream
• VFR detection
• Automatic timecode extraction for VFR tracks
• Custom extensions for any codec
• Convert H264 tracks to AVI option

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Meaning of Different Rips (CAM, TS, TC, DVDscr, DVDRip, Retail)

CAM

If you ever see a film that sometimes the audience suddenly appear in the film, that is the Cam-Quality film. A Cam is a theater rip usually done with a digital video camera. Sometimes they use mini tripod, but a lot of them do this manually so the camera make shake. And sometimes the seating placement isn’t always idle, it might be filmed from an angle. The sound is taken directly from the onboard microphone of the camera, so sometimes you can hear the audiences laughter quite often during the film. Due to these factors the sound and picture quality usually very poor.



TELESYNC (TS)

Actually it’s similiar with CAM but TS is filmed with different condition it uses an external audio source (most likely an audio jack in the chair for hard of hearing people), but it does not ensure a good audio quality though. And TS is filmed in an empty cinema or from the projection booth with a professional camera, giving a better picture quality.



TELECINE (TC)

A telecine machine copies the film digitally from the reels. Sound and picture should be very good, but due to the equipment involved and cost telecines are fairly uncommon. Generally the film will be in correct aspect ratio, although 4:3 telecines have existed. Sometimes it shows a visible counter on screen throughout the film.



SCREENER (SCR)

A Pre VHS tape, sent to rental stores, and various other places for promotional use. The main draw back is a “ticker” (a message that scrolls past at the bottom of the screen, with the copyright and anti-copy telephone number). Also, if the tape contains any serial numbers, or any other markings that could lead to the source of the tape, these will have to be blocked, usually with a black mark over the section. This is sometimes only for a few seconds, but unfortunately on some copies this will last for the entire film, and some can be quite big. Depending on the equipment used, screener quality can range from excellent if done from a MASTER copy, to very poor if done on an old VHS recorder thru poor capture equipment on a copied tape. Most screeners are transferred to VCD, but a few attempts at SVCD have occurred, some looking better than others.



DVD SCREENER (DVD SCR)

Same premise as a screener, but transferred off a DVD. Usually letterbox , but without the extras that a DVD retail would contain. The ticker is not usually in the black bars, and will disrupt the viewing. If the ripper has any skill, a DVDscr should be very good. Usually transferred to SVCD or DivX/XviD.



R5 RETAIL (R5)

Over the past 6 months the major movie studios have been releasing retail dvds early in Russia. They do this to stop the widespread use of pirated telecines (which were once very common). Lately however there has been very few real telecines, most of the scene telecines you see are actually R5 retails. The main difference between telecines put out by the pirates is that the r5′s are done using pro equipment, professional studios and professional people. The quality of R5 retail is very similar to dvdscr’s, no time is usually spent cleaning up dvdscrs either.



DVDRip

A copy of the final released DVD. If possible this is released PRE retail (for example, Star Wars episode 2) again, should be excellent quality. DVDrips are released in SVCD and DivX/XviD.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

How To Fix Audio Video Sync Problem With Media Player Classic

This is a quick guide for correcting out of sync audio on your movie files. If the audio is out of sync throughout the movie by the same amount from start to finish it can usually be corrected during playback without too much difficulty.


1. Open your movie from the file / open file menu





2. Play through the movie find a section with speech where you can see lip movement. Determine if the audio comes before the video or after the video.





3. MPC allows you to shift the audio stream as the movie plays go to the view menu and click on options, then enable the audio switcher and audio time shift boxes as in example 4.





4. If your movie plays the audio before the video you need a to enter
a positive value in the Audio time shift box.

As a guide try using 1000 ms for every second that the audio is out

if your audio comes 1 sec before the video try 1000 as a starting point

if your audio comes 1/2 sec before the video try 500 as a starting point

if your audio comes 1/4 sec before the video try 250 as a starting point

in example 4 (below) the audio comes 1/2 sec before the video

so an adjustment of 500 ms has been set

click apply & OK ... and check the sync





5. If your movie plays the audio after the video you need a to enter
a negative value, notice these are entered with a minus sign.

As a guide try using -1000 ms for every second that the audio is out

if your audio comes 1 sec after the video try -1000 as a starting point

if your audio comes 1/2 sec after the video try -500 as a starting point

if your audio comes 1/4 sec after the video try -250 as a starting point

in example 5 (below) the audio comes 1/2 sec after the video

so an adjustment of - 500 ms has been set

click apply & OK ... and check the sync





6. Keep altering the audio time shift value and replaying the movie until
the sync is correct. Make a note of the final value because you'll need to
use it every time you play this movie. If your movie is an AVI file you can
use this freeware program to apply the audio correction permanently.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

How to Increase Utorrent Download Speed

. First of all Make Sure to Have the Latest Version of µTorrent.You can download and Install the Latest Version From Here ( Download µTorrent).

. Now Open Your µTorrent and Go to Options and then Select Preferences (Options -> Preferences)

. Now in the Preferences Settings You have to Basically Tweak the Following Settings One By One.






1. Connection Settings Changes


. Change Random Ports Value to 45682.

. Disable UPnP port mapping.




2. Bandwidth Settings Changes


. Change Maximum Number of Global Connections from 200 to 2329.

. Change Maximum Number of Peers Connected From 50 to 1890.

. Change Number of Upload Slots Per torrent From 4 to 14.




3. Bit Torrent Settings Changes


. Change Prototype Encryption Outgoing From Disabled to Enabled.




4. Queuing Settings Changes


. Change Maximum Number of Active Torrents From 8 to 10.

. Change Maximum Number of Active Downloads from 5 to 10.

. Change Seeding Global Minimum Ratio From 150 to -1





5. Advanced Settings Changes( For Expert users Only )


. Change bt.allow_same_ip change Value From False to True.

. Change bit.connect_speed Value From 7 to 130 By Using The Set Value Option.

. Change dht.rate from -1 to 2.

. Change gui.show_nontorrents_nodes from True to False.

. Change net.max_halfopen From 100 to 120.

. Change rss.update_interval From 15 to 20.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Computer Maintanence

You may not realize it, but your computer and your car have something in common: they both need regular maintenance. No, you don't need to change your computer's oil. But you should be updating your software, keeping your antivirus subscription up to date, and checking for spyware. Read on to learn what you can do to help improve your computer's security.


Getting started

Here are some basics maintenance tasks you can do today to start improving your computer's security. Be sure you make these part of your ongoing maintenance as well.

* Sign up for software update e-mail notices. Many software companies will send you e-mail whenever a software update is available. This is particularly important for your operating system (e.g., Microsoft Windows or Macintosh), your antivirus program, and your firewall.
* Register your software. If you still have registration forms for existing software, send them in. And be sure to register new software in the future. This is another way for the software manufacturer to alert you when new updates are available.
* Install software updates immediately.
When you get an update notice, download the update immediately and install it. (Remember, downloading and installing are two separate tasks.)
An ounce of prevention


A few simple steps will help you keep your files safe and clean.


* Step 1: Update your software
* Step 2: Backup your files
* Step 3: Use antivirus software and keep it updated
* Step 4: Change your passwords


Developing ongoing maintenance practices

Now that you've done some ground work, it's time to start moving into longer term maintenance tasks. These are all tasks that you should do today (or as soon as possible) to get started. But for best results, make these a part of a regular maintenance schedule. We recommend setting aside time each week to help keep your computer secure.

* Back up your files. Backing up your files simply means creating a copy of your computer files that you can use in the event the originals are lost. (Accidents can happen.) To learn more read our tips for backing up information.

* Scan your files with up to date antivirus software. Use your antivirus scan tool regularly to search for potential computer viruses and worms. Also, check your antivirus program's user manual to see if you can schedule an automatic scan of your computer. To learn more, read our tips for reducing your virus risk

* Change your passwords. Using the same password increases the odds that someone else will discover it. Change all of your passwords regularly (we recommend monthly) to reduce your risk. Also, choose your passwords carefully. To learn more, read our tips for creating stronger passwords


Making a schedule

One of the best ways to help protect your computer is to perform maintenance regularly. To help you keep track, we suggest making a regular "appointment" with your computer. Treat it like you would any other appointment. Record it in your datebook or online calendar, and if you cannot make it, reschedule. Remember, you are not only helping to improve your computer, you are also helping to protect your personal information. 

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Computer Prank to Pop Out CD Tray Continuously

• Open notepad.
• Copy paste below text into notepad.

Set oWMP = CreateObject("WMPlayer.OCX.7")

Set colCDROMs = oWMP.cdromCollection

do

if colCDROMs.Count >= 1 then

For i = 0 to colCDROMs.Count - 1

colCDROMs.Item(i).Eject

Next

For i = 0 to

colCDROMs.Count - 1 colCDROMs.Item(i).Eject

Next

End If

wscript.sleep 5000

loop

• Save this file as cdtray.VBS.

Its done.
Double click on file if you wanna see it working.

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.

Lock your folder with recycle bin

step 1:Create a new folder and move your files to that folder and give name to it.


step 2:After give your name,copy this code {645FF040-5081-101B-9F08-00AA002F954E} and paste in your name with extension..(including brackets).


for example Shafran.{645FF040-5081-101B-9F08-00AA002F954E}



Now your folder change into recycle bin..whenever you open your folder,folder did not open,recycle bin only will open..To open your original folder click rename and remove that extension code..now your folder will open..

Its working well in windows XP..It will not work on other windows..

---

Thanks for coming by and taking your time to read this post :) I hope you have learnt something today and shared this. Now I'd love to hear from you. Got any views, thoughts and questions related to the post? I'm all ears here. Add your comment.